SINGER W1666 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
REGULATfNG THE PRESSER FOOT PRESSURE
CHANGING NEEDLE
S. Push down irioer pin (A) to increase pressure.
(Liyht to medium fabrics)
2. Push down outer ring to reiease pressure. (Meavv
labncs)
3. insufficient pressure rnav cause poor feeding,
skifipetf stitches, or difficulty in guiding the fabric.
4. hill piessure adjustment is required whers darn
mq or sewmy embroidery.
DROP FEED (Daring plate is an optional accessories)
1
.
Raise needle to its highest position.
2. Loosen neeoie clamp screw and remove old needle.
3. With the flat side of the needle facing away from you,
insert needle as far up as it wilt go.
4. Tighten the needle clamp screw securely.
There are a tew times when you want to control the feeding of fabric try youi
self.
Raise needie bar to its highest position and raise presser frrot, place daimg plate
over needle plate aligmng two pins ol darning plate with holes of needle plate
You may then determine the movemeru of the fabric by yourself See page 20
for button sewing application
- 13 -
•14
■