K. j – SINGER W1666 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

ZIPPER SEWING
Select straight stitch.
1.
Fold the fabric about 2cm and
place fabric under foot.
2. Zipper foot is designed to sew close
to a raised edge preventing sewing
on zipper.
f. To sew the left side of the zipper,
set the zipper foot on the left side
of the needle.
2.
To sew the right side of the
zipper bring the foot to the right
side of the needle.
1
N..
\
'
k. J
sew as illustrated.
23
HEMMING
1. Raise the foot and the needte to its highest position. Replace the foot with the
hemmer foot.
2. Fold over the fabric edge by about 3mm and place it under the foot. Secure the
folded edge with a few stitches. Take out the workpiece and draw the hem
into the hemmer foot by pulling the threads.
3. Lower the foot and sew the hem.
4. Durning sewing, fold the fabric to the left a little and allow it to run into the
hemmer foot.
5. Make sure that the fabric does not move under the right half of the foot. The
fabric must be fed into the scroll of the hemmer sufficiently so that the work
piece edge runs freely through the groove under the foot.
Only suitable materials can be used and some practice may be necessary to acheive
best results.
2 4
•