To prepare for sewing – SINGER W3851 User Manual

Page 14

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

TO PREPARE FOR SEWING

NEEDLE THREAD PICKS UP BOBBIN THREAD AS FOLLOWS:

Holding the loose end of the needle thread in your

left hand, turn the balance wheel toward you by hand

until the needle moves down and up again to its

highest point. Pull the needle thread gently and the

bobbin thread will come up with it through the

needle hole.

If the bobbin thread does not rise, check to see if at

least 3 or 4 inches of bobbin thread is hanging

loosely from the bobbin case. Then place bttth ends

of the thread back between the two presser foot. toes.