Changing the thread (tying on), Built-in pocket handle – SINGER WSL1634 User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

CHANGING THE THREAD (TYING ON)

It is simple to change the thread in the following
manner.

Cut the thread above the spool pin, and knot
ends of old and new threads together.
Set the tension dials to "O" and raise the

presser foot.

Pull the other end of thread until knots come
under the presser foot. For needle threads, pull

the other ends of threads until knots come to
needle eyes and cut the threads at the both
sides of the knots. Then re-thread the needles.

BUILT-IN POCKET HANDLE

The Built in pocket handle is a convenient way
to carry your machine.

Pocket handle

1 6 -