Clarion DXZ835MP - Manual (Page 17)

DXZ835MP
21
English
Entering MESSAGE INFORMATION
Message up to 30 characters long can be stored
in memory and displayed for CD, CD changer
and TV stations.
∗ The factory default setting is “Welcome to Clarion”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [ a] or [d] button to select “MSG
INPUT ”.
3. Press the [ ] button.
4. Press the [ a] or [d] button to move the
cursor.
5. Press the [D] button to select a character.
Each time you press the [D] button, the
character changes in the following orders:
Numbers
➜ Symbols ➜ Umlaut ➜ Capital
letters
➜ Numbers…
6. Turn the [ROTARY] knob clockwise or
counterclockwise to select the desired
character.
7. Repeat step 4 to 6 to enter up to 30
characters for message.
8. Press and hold the [ ] button for 2
seconds or longer to store the message in
memory and cancel input message.
Message display
When the unit is powered on or off, a message
is displayed. The user can turn this message
display ON or OFF.
∗ The factory default setting is “ON”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [ a] or [d] button to select “MES-
SAGE”.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise to set the message display “ON”
or “OFF”.
4. Press the [T] button to return to the previous
mode.
Operations Common to Each Mode
Setting the method for title scroll
Set how to scroll in CD-TEXT or MD/MP3/WMA.
∗ The factory default setting is “ON”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [ a] or [d] button to select
“AUTO SCROLL”.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise and select “ON” or “OFF”.
● ON:
To scroll automatically.
● OFF:
To scroll just 1 time when the title was
changed or the title key was pressed.
4. Press the [T] button to return to the previous
mode.
Dimmer level
1. Press the [T] button for 1 second or longer to
enter ADJ mode.
2. Press the [ a] or [d] button to select the
“DIMMER LV”.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise to adjust Dimmer level.
4. Press the [T] button to return to the previous
mode.
∗ Adjustment range is OFF to LV5.
∗ Factory default setting is LV3.
Adjusting the display contrast
You can adjust the display contrast to match the
angle of installation of the unit.
∗ The factory default setting is “8”. (Adjustment level:1to
18)
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [ a] or [d] button to select
“CONTRAST”.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise to adjust the contrast.
4. Press the [T] button to return to the previous
mode.