Sears 113.177020 - Manual (Page 6)

¥ac Assembly
^. tine up v&cimm port in icsp assenibly
with drain C'&p tocaîs-d on the f ront of
fha cifum.
2. Place tid cft topt ^ dmm with the han-
ijîss snug against the drom chanriei.
3. Be sure fid coritpletefy covers the fop o1
the drum so lestisgo does not occur.
4. Push do*ii Oh tofj of il» hafidiss te
cause !lis fte-xit'ii# fcekirig tabs to hook
onto the drum tip of the charme!.
5. Make sure thaï the locking tabs are
snapped in iriacs to ptsvent Ine Ntf from
coming off, {See Inset bedw,)
6. Insert the flexilris plastic end of the
hose, which Is opposite the swivel end,
irsio file vacuum port directly .above tire
drain
T. Placé the utility nozzle securely on the
swivel end o f the hose and the vac ¡s
ready for use.
NOTE; The swive! end of the hose is
removabis if more hoses need to be
attached for more length from If» vac.
lb remove the swivel portion of the hosa ,
gra.sp the hose swivsi and lirrfily pub it
out
of the fiexiWe hose. Connect the soft
end of a .rsecond Ivose (acce.ssory #9-
17820) mto the swivel end of the original
hose by fo-fcing the sechons toget-her
unii! they til tightly.
To Store Your Accessories-
1, Slide exlansion handles and accessO'
■rifts over tha rings on the easier ieet.
1.1/4" accessories fit over the irsnet
ring, and fha 2.1/2” accessories fit over
the outer ring.
2. To remove harsdiss and accessories,
lightly rotate and pul! upward.