Sears KENMORE 911.47466 - Manual (Page 16)

SELF-CLEANING CYCLE
continued
HOW TO SBTA CLEAN CYCLE
The Clean Cycle is automatically set for 4
hours, but you may change this from 3 hours
if oven is lightly soiled up to 5 hours if oven is
heavily soiled.
I
HOUR MIN
V.
START
i. Press the CLEAN pad.
4 hours will show in the
display.
2* If you want to change the
length of clean time press
the UP and/or DOWN
arrow pad
3. Press the START pad
TO STOP A CLEAN CYCLE
cl Ì ar Ì Simply press the CLEAR/OFF
_ 0 FF_j paQf, You will need to wait for the
oven temperature to drop below the lock
temperature (approx. 1 hour) before
attempting to open the door. Locked door will
go out of the display.
After the cycle, you may
notice some white ash in
the oven Just wipe it up
with a damp cloth or
If White spots remain, scrub them with a
soap-filled steel wool pad Be sure to rinse
thoroughly. These are usually deposits of salt
that cannot be removed during the cycle
If for any reason you are not satisfied
with the cleaning results, Just repeat
the cycle.
HOUR MIN
.V) (V
TOSETADELAYEO
START CYCLE
1. Press the CLEAN pad.
2. If you want to change the
length of clean time press
the UP and/or DOWN
arrow pads.
3. Press the DELAY
START TIME pad.
(2) (5) UP or DOWN
MIN arrow pads to set the time
—УQцpf0fgf¡¡^Q clean cycle
(\/^j \\/j to start
S. Press the START pad
16