Sears 565.69401 - Manual (Page 12)

KITCHEN TIMER
You can use the Kitchen Tinner function independently, even while a cooking
program is going on in the oven.
Example: To set timer for 3 minutes:
Step Procedure Keypad Display
1
Touch KITCHEN TIMER.
KITCHEN
TIMER
n x
U
Touch 3,0 and 0 to set 3
minutes.
{up to 99 minutes 99 seconds)
3 0 0
- i n n x
D u u
Touch START.
The timer starts counting and
beeps sound for 7 seconds at
the end.
START fl
f n n x
I _f u u
Note: • To check remaining timer time during cooking, touch KITCHEN TIMER.
The remaining time appears in the display for 5 seconds.
• To clear a timer setting, touch STOP/CLEAR while the display shows
remaining timer time.
• The indicator K flashes when the display shows a cooking time.
• The indicator K lights when the display shows a timer time.
• To stop beeps of Kitchen Timer, touch KITCHEN TIMER,
• Kitchen Timer wili not beep if the oven beeps at the same time to indicate
another oven operation (the end of a cooking, for example).
• If you do not enter a timer time for 10 seconds after step 1 , the setting is
cleared with a beep.
• if a cooking completes while you are setting the Kitchen Timer, ail settings are
cleared. Restart from step 1,
• If no key is touched for 5 seconds after the last key entry at step 2 above, the
timer automatically starts.
TIME COOKING______ ________________________________
This basic microwave cooking method allows you to cook food for a desired time.
In addition to the PI00 (maximum) power level, you can select different microwave
power from 11 levels, P 0 to PI 00 (0-100% of total power level).
Manual Defrosting (Without using Auto Defrost feature):
Usepower level P 30. To speed up the defrosting of dense foods over 1 lb (450 g),
you may start on PI00 for 2 minutes, then reduce to the level P 30.
Delay Start Cooking:
Use power level P 0 for the first stage of multistage cooking. You can delay cooking
start time by up to 99 minutes 99 seconds.
Multistage Cooking
You can program up to 3 stages of cooking in sequence. Each stage can be
programmed with a different power and time setting. To program
2 -stage or 3-stage
cooking, repeat the Time Cooking steps 1 to 3 and touch START. The oven
automatically proceeds to the end of cooking.
• When you cook on P100 power for 1-stage, you must enter POWER, 1 and 0.
'fiu can not skip step 2, 3 when setting multistage cooking.
12