Sears KEMORE 758.144533 - Manual (Page 5)

Location Instructions (continued)
NOTE: Due to release of cool, moist air
from humidifier, it is best to direct air away
from home thermostat and hot air regis­
ters. It is best to position humidifier next to
an inside wall. Hot air registers and cold
air from outside walls can affect the effi­
ciencies of the controls. Unit should not
be placed where warm air from a hot air
register blows directly on unit.
Step 2
The humidifier should be positioned with
the back (cord exit side), at least 2 inches
away from the wall. Air needs to enter
through louvers in the rear panel in order
for the humidifier to operate at peak effi­
ciency.
At Least
Electrical Hook-Up
—
Locate nearest 120V A.C. wall socket in
the location desired, preferably on inside
wall. Plug in the electrical cord.
WARNING: To reduce the risk of fire
or shock hazard, humidifier should
be plugged into a 120V A.C. outlet.
Do not use extension cords.
Water Fill
WARNING: To reduce the risk of
shock, always unplug humidifier
before filling, cleaning, or servicing.
WAiRNING: To reduce the risk of fire
or shock hazard, do not.pour or spill
water into control or motor area.
Close the control cover. If controls
get wet, let them dry completely and
have unit checked by authorized
service personnel before plugging
in.
This humidifier is designed to be used
with the two water bottles that are located
under the pivoting lid.
Opfi£kthe pivoting lid of the humidifier.
Remove the water bottles, lift them
straight up and out of the cabinet.
Pivoting Lid Removed for Clarity