Sears 831.23953.0 User Manual

Page 14

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

18. Identify the Right Pedal (13), which is marked

with a “Right” sticker, and orient it as shown.

Attach the Right Pedal (13) to the Right Pedal
Arm (49) with three M10 x 45mm Screws (75)
and three M10 Split Washers (78). Make sure to

use the center hole and the two outer holes

to attach the Right Pedal.

Repeat this step on the other side of the

elliptical.

19. Make sure that all parts of the elliptical are properly tightened. Note: Some hardware may be left over

after assembly is completed. To protect the floor or carpet from damage, place a mat under the elliptical.