Cleaning tips, Removable cooktop burner components – Sears KENMORE 36745 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CLEANING TIPS
PART
CLEANING MATERIALS
REMARKS
BRUSHED CHROME
COOKTOP
Detergent, warm water, plastic
or nylon scouring pad or boll In
DIp-lt® solution to remove stub
born soil
Do not scour chrome tops. Stubborn
stains may be removed by using Espree
Magwheel Cleaner® or Turtle Wax Pol
ishing Compound®. To remove finger
prints on brushed chrome, apply a little
baby oil with a paper towel. Rub In the
direction of the brush marks. Armor All
Protectant® can also be used (after clean
ing). Be sure to clean spills of acidic
foods quickly. Vinegar spills can perma
nently stain chrome.
GLASS OVEN DOOR/WIN-
DOW (SOME MODELS)
Glass cleaner and paper towels
Remove stubborn soil with paste of bak
ing soda and water. Do not use abrasive
cleaners. Rinse thoroughly.
BROILER PAN AND GRID
Detergent, warm water, soft cloth
or a chrome cleaner or special
cooktop cleaning creme
Remove soiled pan from oven to cool.
Drain fat or drippings. Fill pan with warm
water. Sprinkle grid with detergent and
cover with damp cloth or paper towels.
Let pan and grid soak for a few minutes.
Rinse or scour as needed. Dry well. Grid
and pan may be washed in a dishwasher.
REMOVABLE COOKTOP BURNER
COMPONENTS
Be sure that all controls are turned off and that the unit
Is cool.
To remove:
Lift Off burner grate, burner top and trim ring. Do not
remove burner bowl.
See the Cleaning Tips Chart in this manual. Be sure to
dry burnertops completely before re-assembling burner.
A
The electrode of the spark igniter is
exposed
beyond
the
top
of
the
burner.
When
cleaning
the
burner
bowl, be careful not to snag the
electrode of the spark igniter with
your cleaning cloth. Damage to the
igniter could occur. Be careful not
to turn on any cooktop controls while
cleaning
burner
bowls.
A
slight
electrical shock might result, which
could cause you to knock over hot
cookware.
differently than the otherthree. It includesan Indexing key
for the spark Igniter. The notch with the indexing key
fits over the spark Igniter when positioning burnertop.
3. Place burner grate over burner assembly and into
burner bowl. The bottoms of the four larger burner
grate fingers fit into fourcorresponding indentations
in the burner bowl.
BURNER GRATE
To replace:
1. Place the trim ring on the burner body.
2. Position the burner top on the burner body. To correctly
seat the burner top, examine the four notches on the
underside of the burner top. One of them is shaped
SPARK
IGNITER
BURNE
BODY
BURNER TOP
TRIM RING
BURNER BOWL
NGCCH33