Sears 385 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTiON 2. PREPARE YOUR MACH
Prepare the Bobbin (Continued)
1. Put the bobbin into the bobbin
holder so that the thread feeds
counter-clockwise (left).
toward you through the tension
slot
(
a
) .
toward the back of the machine
through the slot @ .
pushing it down slightly over tti
bobbin. Allow about 4 inchest
thread to show above the need
plate.
Threading chart is located behind
the face cover plate.
16