Canon SCANFRONT 220 - Manual (Page 137)

7-9
Chapter 7 Maintenance
❏ Checking the Page Count and Resetting
the Counter
Check the page count on the Roller Counter Reset screen
of the Administrator Setting screen.
IMPORTANT
The counter counts the number of pages fed by replaced rollers.
Make sure to reset the counter when you replace the rollers.
1. Log in to the Administrator setting screen.
2. Press the [Roller counter reset] button to display the
[Roller counter reset] screen.
[Roller counter reset] screen
Total pages scanned
This counter is for the total number of document pages fed
by the scanner.
Pages scanned from the previous roller
change
This counter is for the number of document pages fed by
the scanner since the roller was replaced and the counter
was reset.
3. Press the [Reset] button to reset the counter.
4. Press [Close] to log out of the Administrator setting
screen.