Cleaning the retard roller, Cleaning the retard roller -5 – Canon SCANFRONT 220 User Manual
Page 133
7-5
Chapter 7 Maintenance
❏ Cleaning the Retard Roller
Use the procedure below to remove and attach the retard
roller during cleaning or replacement.
CAUTION
Do not use excessive force when removing or attaching the
retard roller. Doing so may cause the roller to become
deformed, resulting in feed errors.
1.
Open the roller cover.
2.
Lift up the roller lock lever a, and slide it in the
direction of the arrow b.
3.
Move the retard roller in the direction of the arrow a,
and then remove it from the shaft b.
4.
Remove any dirt from the roller using a cloth that has
been soaked in water and thoroughly wrung out.
5.
Place the roller in the roller compartment inside the
roller cover, and then align the notch in the roller with
the shaft of the scanner.
- CanoScan Lide210 (2 pages)
- CanoScan LiDE110 (31 pages)
- CanoScan LiDE110 (32 pages)
- CanoScan LiDE 200 (2 pages)
- CanoScan 8800F (16 pages)
- CanoScan D646U (21 pages)
- CANOSCAN N676U (19 pages)
- CanoScan N650U (2 pages)
- IMAGEFORMULA DR-X10C (67 pages)
- 220E (44 pages)
- Desktop Scanner DR-2080C (4 pages)
- M11037 (71 pages)
- CANOSCAN 9000F (19 pages)
- DR-7550C (2 pages)
- DR-4080U (56 pages)
- DR-M160 (56 pages)
- CANOSCAN LIDE 600F (73 pages)
- MF 3240 Series (136 pages)
- Image Filing Systems DR-5010C (4 pages)
- DR-3080C (60 pages)
- SCANFRONT 300P (193 pages)
- DR-6080 (108 pages)
- DR-2010C (4 pages)
- D660U (2 pages)
- DR-5060F (89 pages)
- DR-5060F (92 pages)
- P-150M (105 pages)
- Scanner (4 pages)
- CANOSCAN LIDE 700F (2 pages)
- CANOSCAN LIDE 700F (19 pages)
- FB320P (79 pages)
- DR-4010C (142 pages)
- 800 (51 pages)
- CanoScan LiDE60 (2 pages)
- D1230U/D2400U (24 pages)
- IMAGEFORMULA DR-7090C (2 pages)
- S 400 MS 500 (6 pages)
- CR-50 (58 pages)
- IMAGE FORMULA DR-2010C (118 pages)
- CanoScan 3200 (20 pages)
- FB330P/FB630P (82 pages)
- MS-350 (4 pages)
- FORMULA CR-50 (24 pages)
- CS-S 4.3 (109 pages)
- IMAGEFORMULA DR-2010M (36 pages)