Sears 274.4392839 - Manual (Page 4)

Getting Started
+ HIGH
LOW
- OFF
PICTURE
TILT
First-Time Operation (continued)
Adjust PICTURE TILT switches if necessary.
Tliis model has an extra large
color picture tube. The effects
of geomagnetism (Earth’s
magnetic field) may cause the
picture to tilt slightly. The
POLARITY and STRENGTH
switches on the back of the TV
let you compensate for this
effect. If the picture appears
tilted, follow these steps to
improve it.
1. Make sure the STRENGTH switch is in the OFF position
as the diagram shows.
2. Move the STRENGTH switch to the LOW position. If this
improves the tilt but it is still not satisfactory, move the
STRENGTH switch to the HIGH position. This should
correct the situation. If moving the STRENGTH switch
makes the tilt worse, go to the next step.
3. Change the position of the POLARITY switch. If this
improves the tilt but it is still not satisfactory, move the
STRENGTH switch to the HIGH position. This should
correct the situation.
You may need to reset the POLARITY and STRENGTH
switches if the TV is moved or repositioned in the room,
especially if the TV will be facing a different direction.
8. Set the clock.
• Repeatedly press the SETUP button to select the CLOCK
SET function. Then press and hold the - button to select
the correct hour (including AM or PM). Press and hold
the + button to select the correct minute.
• The correct time will now appear on the screen whenever
you change channels or press the remote's TV or DSPY
button.
Note: If power is interrupted for an extended time, you will
need to reset the clock.
9.
Review audio, video, and setup menus.
To see the audio
menu press the
AUDIO button.
Repeatedly press
AUDIO to select
(highlight) the
desired function,
then press + or -
to change it.
Details are on
page 9.
Press
AUDIO to
see the
audio
menu.
Basa -...-..'..I...
Balance -...y,.......
Sterèo/SAP: Stereo
Expand Stereo; Ofl
Speakers: On
... +
I. .'..-I-
Press the VIDEO
button to see the
video menu.
Repeatedly press
VIDEO to select
(highlight) the
desired function,
then press + or - to
adjust it to your
personal preference. Details are on page 8.
Press
VIDEO to
see the
video
menu
Tint - . I +
Contrast -........... I. +
Bright
-........ +
Sharp -............ I +
........
Picture Reset
The PICTURE RESET function lets you quickly return all
the picture controls back to the factory settings by
pressing + or -.
Repeatedly press
the SETUP button
to see the setup
functions and to
select (highlight)
the function you
want to adjust.
Then press + or -
to change it.
Details begin on
page 10.
Press
SETUP
repeatedly
the setup ‘ '
functions. »Chan Mem;,Stored
^Cable/Air;.^able;.'j.,’,ii^f?%i
SrOT'.SChani.t:
-Cable Char.-
10. Review other features.
Later, after you feel comfortable with your TV and remote
control, you can review the detailed control descriptions
and special features covered in this manual.
You can use the rest of this manual as a reference guide to
review detailed information about each operating control
and function. The alphabetical index in the back will help
you quickly locate desired information.