Cable box setup, Setting up cable box channel, Operating features – Sears 274.4392839 User Manual

Page 19

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Cable Box Setup

The CABLE CHAN function lets you

program to which channel the TV
will automatically tune when you
press the CABLE button on the
remote. This is handy if you have to

connect a cable box to your TV. You
will no longer have to remember the
output channel of the cable box

because the TV will remember for

you.

For example, if you connect a cable
box to the TV’s CABLE/ANTENNA
connector (as shown on page 19),

you will no longer have to remember
to select channel 2, 3, or 4 on the TV
to see what’s coming from the cable

box. By entering the cable box’s
output channel (usually 02, 03, or 04)

next to the CABLE CHAN function,
the TV will automatically tune to that
channel each time you press the

CABLE button on the remote.

This function is especially convenient
if you have a remote-controllable
cable box that can be operated by the

CABLE button on the remote (as
described on page 23). Pressing the
CABLE button will then not only
switch the remote to cable mode but
will also automatically tune the TV to
the proper channel for viewing the

picture from the cable box.

Operating Features

Setting Up Cable Box Channel

1. Repeatedly press SETUP to select the

CABLE CHAN

function.

8:27 PM

Chan Mem: Stored
Cable/Air; Air
VCR1 Chan: 91

VCR2Chan- 92

Cab'e Chan: Off

3. Press the + button to program the

channel number you selected into

the CABLE CHAN function memory.

2. Enter the channel number you want to

program by pressing two digit buttons

on the remote control. (The channel

number you enter is the channel to

which the TV will tune automatically

when you later press the CABLE

button on the remote.) The TV will

change to the channel you select.

This will help you to confirm that it is

indeed the channel you want the TV

to automatically tune. Most cable

boxes output their signals on either

channel 02, 03, or 04.

8.27 PM

Chan Mem Stored
Cable'Air. Air '.
VCRIChan 91
VCR2Chan. 92

Caole Chan C3

Note: Pressing the - button here will
turn off this feature and display

CABLE CHAN: OFF again.

8 27 PM

Chan Mem- Stored
Cable/Air; Air
VCR1 Chan: 91
VCR2Chan 92

Cab-eCf''an: Off