Amplifler or cassette tape deck audio amplifier, Audio cassette recorder or amplifier, Connecting other components – Sears 274.4392839 User Manual

Page 31

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Amplifler or Cassette Tape Deck

Audio Amplifier

Connecting Other Components

If your stereo amplifier is not part of a “system” that has its

own remote, connect it to the TV as shown here.

Note:

If the stereo amplifier is part of a system that has its own remote,

you may choose to connect it to the TV as shown below using the
SELECT Oi/r jacks.

With the connection shown here, you’ll be able to change and

mute volume with the TV’s remote control. You’ll also be able

to remotely control bass and treble functions.

Connection:

Connect the “L” and “E” HI FI Oi/T jacks to the corresponding

input jacks on the stereo amplifier (such as At/X, TUNER, or CD).

Do not use the PHONO inputs. If your amplifier is not stereo

(mono), connect it to the TV’s E/MOVO jack. Consult the

amplifier’s owner’s manual for the manufacturer’s recommended

hookup.

Operation:

If desired, turn off TV’s internal speakers as described on page 9.

Adjust the amplifier for normal listening. Then control sound with

the VOL and MUTE buttons on the TV’s remote.

Audio Cassette Recorder or Amplifier

Back of TV

If your stereo amplifier is part of a “system” that has its own

remote control, connect it to the SELECT OUT jacks as shown

here. The “fixed level” audio signal present at these jacks is also

ideal for connecting an audio cassette recorder to record audio

from the TV. This constant audio signal is not affected by

pressing the VOLUME buttons on the TV’s front panel or the

TV’s remote control.

Cormection:

Connect SELECT OUT “U' and “E” to the corresponding input

jacks on the stereo amplifier or audio cassette recorder.

If your amplifier is not stereo (mono), connect it to the TV’s

R/MONO)&c\i.

Consult the equipment’s owner’s manual for the

manufacturer’s recommended hookup.

Operation:

Select a TV channel and turn down the sound on the TV, or turn

off TV’s internal speakers. Adjust sound with controls on the

amplifier or cassette recorder. If the ampUfier or cassette recorder

is part of a “system” that has its own remote, use the system’s

remote to adjust sound.

* Optional accessories are available from most dealers or electronics supply stores.