Questions? before you call for service – Sears 61118 User Manual
Page 40
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Questions? Before You Call for Service..
PROBLEM
TOP BURNERS DO NOT
LIGHT DR DO NOT
BURN EVENLY
BURNER FLAMES VERY
LARGE OR YELLOW
POSSIBLE CAUSE
' Make sure electrical plug is plugged, into a live power outlet.
' Burner Boles on the side or around the top of burner may be cloeeed.
Remove burners (on models widt standard twin burners) or burner heads :
(on models with sealed burners) or burner caps on spill-proof models, and
clean them with a sewing needle or twist-de. Make sure you do not enlarge '
die holes. On spiE-proof models,^ check electrode areaTor hmned-on food or gr^e.'
Malce sure the drip pans are installed correctly.
:
Pilot(s) is (are) not lit (on standing pilot models). See the Lighting
Instructions for Standing Pilot Models section in Surface Cooldng.
If range is connected to LP gas, contact the person who installed your range
ormade;the conversion.
'‘I-
'
SURFACE BURNERS
LIGHT BUT OVEN
DOES NOT
- Thypyen gas shut-offyaive may have accidentally heen_ moved during :
.cleaning or m o v i n e . - ‘
^ ^L^
To check the oven gas shut-off;valve on standard twin burner models,- raise the
cooktop and look for the gas shut-off lever at the extreme right rear corner
Follow the direcdons in box A or B that match your regulator
To check the oven gas shut-off valve on scaled burner models, remove
the storage drawer, broUcr drawer dr Icick panel and look foi die gas shut
off lever at the back of the range.
40