Care of filter, Steps, Caution – Sears 758.14808 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
RUIR
H(HJ€R
mm
THMX
miïH
RltrtlO
Remove minorai depoeils from
holder and inside of housing by aripkig
with
clean
damp
cloth.
Humidifier
Cleaner (32-7283) is available in most
Sears stores for easiest cleaning of
deposits. Do not use anv type of cleaner
on the finer.
to REPLACE PARTS
SnstaB float on filter tracks. Insert new fil
ler in Mlsr holder imd replaoe fMer ho№
er on filar track.
Replace holder In humidifier tank by lin
ing up rear slot on filter holder frame
track on tank. T1 holder toward rear
and lower unM front tab lines up with
front slot on filter holder.
steps
Pick
1^ motor'support section and wh№
starving over the tank, locate the tabs
that the support section sits on. Gently
siida motor support section down into
tank (Figure 9). Engage the electrical
cord in the slot In the housing.
steps
Positkm the stattonary lid on the hous
ing, a little to the left of its normal posi
tion, Slide the lid to the right until the tab
on the lid engages with the detent on
the housing. Close the hinged access
lid.
Care of Filter
CAUTION
To help retard bacteria growth and
keep maximum efficiency, the filter
should be replaced with a SEARS
replacement filter at least once a sea
son, or more often under hard water
conditions.
Filter may be rinsed in clear water only.
Leave filter in filter housing. Take care not
to damage paper.