Operation, Know your snow thrower – Sears 536.884811 User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

OPERATION

KNOW YOUR SNOW THROWER

READ THIS OWNER’S MANUALAND SAFETY RULES BEFORE OPERATING YOUR SNOW

THROWER.

Compare the illustrations with your snow thrower to familiarize yourself with the location of various

controls and adjustmerrts. Save this manual for future reference.

AUGER DRIVE

LEVER

TRACTION DRIVE

LEVER

CRANK

ASSEMBLY

CHUTE DEFLECTOR

FIG. 7

SEARS TRAC-PLUS SNOW THROWERS conform to the safety standards of the American National Standards

Institute.

AUGER DRIVE LEVER - Starts and stops the auger and
impeller (snow gathering and throwing).

TRACTION DRIVE LEVER - Propels the snow thrower
forward and in reverse.

SPEED SHIFTER LEVER - Selects the speed of the
snow thrower (6 speeds forward and 2 speeds reverse).

CRANK ASSEMBLY - Changes the direction of snow

throwing through the discharge chute.
CHUTE DEFLECTOR - Changes the distance the snow
is thrown.
DISCHARGE CHUTE - Changes the direction the snow
is thrown.

WEIGHT TRANSFER PEDAL - Engage for heavy snow
conditions, to keep the snow thrower from climbing drifts
and hard-packed snow. When released, it eases trans
port of the snow thrower.
HEIGHT ADJUST SKIDS - Adjusts the ground clear
ance of the auger housing.
IGNITION KEY - Musi be inserted to start the engine
RECOIL STARTER HANDLE - Starts the engine manu-

aliy.
CHOKE CONTROL - Used to start a cold engine.
PRIMER BUTTON - Injects fuel directly into the carbu
retor manifold for fast starts in cold weather,,

THROTTLE CONTROL - Controls the engine speed.