Keep your dispensing systilf^lm-gqod'woikingordeb – Sears 625.34929 User Manual

Page 17

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

KEEP YOUR DISPENSING SYSTilf^lM-GQOD'WOiKINGORDEB;::

If the dispensing system is exposed to the sun,
replace the solution tubing every 6 months. Re
place the tubing yearly if the system is instalied
indoors.

CLEAN THE STRAINER -- Before filling the tank
with solution, remove the strainer, remove the
threaded fitting from the end of the strainer, then
clean by forcing water backwards through the
strainer.

CHECK THE INJECTION FITTING - The plastic

sleeve on the injection fitting helps to keep it clean
and working. However,check it every few months
to keep it from plugging.

CAUTION: BE SURE TO TURN OFF WATER
SYSTEM PRESSURE BEFORE REMOVING THE

INJECTION FITTING.

Electrical Voltage............ 115 AC

Frequency............................ 60Hz

Amperage..................................37

Max. Pumping Rate per
Hour........................... 0 5 gals. (1.89 Liters)

Max. Pumping Rate per

24 Hours.................... 12 gals. (45.4 Liters)

Max. Water System
Press. ............. ............ 75 psi (5.27 kg/cm^)

Reservoir

Capacity..................... 15 gals. (56.8 Liters)