Vlog removal, Warning, Clog removal – Sears Vacuum Cleaner User Manual

Page 16

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

VLOG REMOVAL

WARNING

Electrical Shock Or Personal Injury Hazard

Disconnect electrical supply before servicing or
cleaning the unit. Failure to do so could result in

electrical shock or personal injury from cleaner

suddenly starting.

For best cleaning
results, keep the
airflow passage

clear.

Unplug the power

cord from the out
let before check
ing the airflow
passage.

Check each
starred area
occasionally for
clogs.

Disconnect the wand from the nozzle hose and

check the wand for clogging.

While running the vacuum cleaner with the wand dis
connected, stretch the hose in and out to remove
the clog.

If the clog still exists turn the vacuum OFF and unplug

the power cord. Turn the vacuum cleaner over,
exposing the underside. Remove the lower plate.

Remove the short nozzle hose from the housing by
lifting it straight up. Inspect the hose end and clear it
of any obstructions. Reinstall the short nozzle hose

and lower plate.