Sears Vacuum Cleaner - Manual (Page 13)

Grasp the clips at the back and pull forward and up
to remove the lower plate.
A
WARNING
Personal Injury Hazard
Always unplug the vacuum cleaner More cleaning
the brush area as brush may suddenly restart. Failure
to do so can result In personal injury.
TO CLEAN BRUSH:
Carefully lift the right end of the agitator assembly
and then lift the left end. Remove the brush
assembly.
Remove the worn or broken belt from the motor
drive shaft.
A
WARNING
Personal Injury Hazard
Be careful when removing brush assembly, the belt
tension is high. Fcalure to do so could result In per­
sonal injury from brush assembly releasing quickly
and snapping away.
Remove any dirt or debris in the belt path area or in
the brush roller area.
Carefully remove the brush end caps and washers to
check for string and hair build-up.
CAUTION:
When you remove
the end caps, a
small washer on
each end may
come off. Do not
lose^these two
washers.
Replace the
washers and
end caps. See
exploded view
for correct
assembly.
Exploded View > Brush Assembly
12