Sears 625.34842 - Manual (Page 38)

SECTION 1
WATER SOFTENER START-UP
1C. PROGRAM THE TIMER
FIG. 1
display UP button
DOWN
button
(Recharge Tonight-Now)
When the transformer is plugged in, the model code
SR17 shows in the face plate display for a few
seconds, followed by a test number (example: S3.0).
After the test number, 12:00 AM begins to flash.
PRESENT TIME and RECHARGE TONIGHT show at
the bottom of the display.
CODE
à
J ï
..J» »
CD in
DD.U
■ ••
• •• •
PRESENT TIME
NOTE:
If SR — is flashing in the display, press the UP 0
button (FIG. 1) until SR17 shows. Then, press the
SELECT button to display the flashing 12:00 AM. If
other than SR17 shows, when the transformer is
plugged in, please see page 17 to reset.
SOUND “BEEPER”: A “beeper” sounds while
pressing buttons for timer set-up. One beep signals a
change in the face plate display. Repeated beeps
means the timer will not accept a change from the
button you have pressed, telling you to use another
button. For example, in setting the hardness (step 2),
the beeper sounds repeatedly when the display
reaches 1 using the DOWN button, or the highest
hardness setting using the UP button.
1. SET PRESENT TIME OF DAY:
NOTE:
If the words PRESENT TIME do not show in the dis­
play, press the SELECT button (FIG. 1) until they do.
■ Press the Q UP/DOWN Q buttons to set the
present time. Press UP to move the display ahead;
press DOWN to move the time backward.
PRESENT TIME
à,
If the present time is between noon
and midnight, be sure PM shows.
If the present time is between
midnight and noon, be sure AM
shows.
NOTE:
Each press of the UP or DOWN buttons changes the
time by 1 minute. Pressing and holding the buttons
changes the time 32 minutes each second.
PRESENT TIME