Sears 917.25953 - Manual (Page 16)

CUSTOMER RESPONSIBILITIES
1 iViAiNTENANCE SCHEDULE
FILL IN OATES
AS YOU COMPLETE
REGULAR SERVICE SERVICE DA 'ES
Check Brake Operation
1 / 1/
Check Tire Pressure %/ ✓
T Check for Loose Fasteners ✓
✓
p
Sharpen/Repiace Mower Blades 1/4
A
c
T
Lubricallon Chart
6 /
6 /
Check Battery Level/Recharge ✓ e
0 Clean Battery and Terminals
✓ ✓
R
Check Transaxle Cooling ✓
AdjusI Blade Belt(s) Tension
✓ 5
Adjust Motion Drive Beltfsj Tension
Check Engine Oii Level ✓ ✓
Change Engine Oil 1/ ^3,3 ✓
E
N
G
Clean Air Filter 2
Clean Air Screen
1 / 2
tnspeci Mufiter/Spark Arrester
✓
1
Replace Oil Filler (il equipped} ^,2
N
Clean Engine Cooling Fins %/ 2.
E
Replace Spark Plug
✓ ✓
Replace Air Filler Paper Cartridge |/a
Replace Fuel Filter
✓
1 - Chantja mcjfB atien whan operating undor a heavy load or in high ambient lamperaturas-
2 ' Service more aten when operating in dirty or dusty cortditions " ' ‘
3 - It equipped with oil titter, change oil every 50 hours
4 - fieptace blades more often when mowing in sandy soil
GENERAL RECOMMENDATIONS
The warfanty on this iractor does not cover items that have
been subjected to operator abuse or negligence. To
receive full value from the warranty, operator must maintain
tractor as instructed in this manual.
Some adjustments will need to be made periodically to
properly maintain your tractor.
Ail adjustments in the Service and Adjustments section of
this manua] shouid be checked at least once each season.
• Once a year you should replace the spark plug, clean
or replace air filter, and check blades and belts for
wear. A new spark plug and dean air filter assure
proper air-fuel mixture and help your engine run better
and last longer,
I ICC
• Check engine oii level
• Check brake operation.
“ Check tire pressure,
“ Check for loose fasteners.
5 - If equipped wllh adjustable syaram
6 -
Eaqulrsd'lf equipped wish fflalmenancs-ftsa ttaHery
7 * Tighten (ront axle pivot tjoil lo 3S l(.-!bs maximuffl. _
Do not overtighsen
LUBRICATION CHART -...
16
(D SAE 30 OR 10W30 MOTOR OIL
(D GENERAL PURPOSE GREASE
(D REFER TO CUSTOMER HESPONSIBiUTiES "ENGINE” SECTION
IMPORTANT: DO NOT OIL OR GREASE THE PIVOT POINTS
WHICH HAVE SPECIAL NYLON BEARINGS. VISCOUS LUBRI­
CANTS WILL ATTRACT DUST AND DIRT THAT WILL SHORTEN
THE LIFE OF THE SELF-LUBRICATING BEARINGS. IF YOU
FEEL THEY MUST BE LUBRICATED, USE ONLY A DRY. POW­
DERED GRAPHITE TYPE LUBRICANT SPARINGLY,