beautypg.com

Clock and timer, To set the time of da yclock, To reset the timer – Sears 911.91768 User Manual

Page 8: To cancel the timer, End-of-cycle tone, H ow to set the tim er, H ow to c ancel the tim er, End-of-c ycle tone, E:od

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

CLOCK AND TIMER

THIER

OWOFF

E:OD

Q

Q

Q

0

/¿'.DO

CLOCK

TIMER

OK/OFF

The CLOCK and TIMER are controlled with touch pads. They do not

control any of the oven operations. (Appearance may vary.)

TO SET THE TiME OF DA YCLOCK

1. Press CLOCK.

2. Use the UP or DOWN touch pad to set the

correct time of day.

3. The clock will start keeping time and the

words

**SET TIME” will disappear within

the next 60 seconds.

TO RESET THE TiMER

To reset the timer during countdown use the
UP or DOWN arrow pad. “SET TIMER” will

flash and you can reset the

TIMER. The

TIMER will count down from the new time you

select and

“SET” will disappear in about 4

seconds.

SETTHETiMER

The

TIMER displays hours and minutes. The

maximum setting is 9 hours and 45 minutes on

the

TIMER. Seconds wilt be displayed during

the countdown of the last minute only. The
TIMER will beep when one miriute remains in

the countdown. Seconds will be displayed
during the last minute countdown.

“HR:MIN”

will disappear from display.

1. Press TIMER ON/OFF. “00” appears

and

“SET TIMER” flashes. “HR:MIN”

appears.

2. Select the desired time using the UP or

DOWN touch pad. The TIMER will begin
to count down and

“SET TIMER” will

disappear about 4 seconds after you select
the time. If you do not wish to wait 4
seconds, press

TIMER and the countdown

will begin immediately.

TO CANCEL THE TIMER

If you wish to cancel the

TIMER while it is

counting down, fjress

TIMER ON/OFF. The

word

“TIME” will disappear from the display

and the display will return to the time of day.
If you wish to cancel the

TIMER white “SET

TIMER” Is flashing in the display, press
TIMER ON/OFF twice.

END-OF-CYCLE TONE

The

END-OF‘CYCLE tone will sound when

the

TIMER countdown is complete. The

display will show

00

and you will hear a

series of beeps. Press

TIMER ON/OFF or

CLOCK to stop the tone.

8

This manual is related to the following products: