Assembly – Sears 831.29723 User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

ASSEMBLY

The CROSS WALK is shipped in the compact stowaway position. Set the CROSS WALK in a cleared area and

remove all pactdng materials. Make sure that all parts have been removed before you dispose of the pack
ing materials. Follow the instmcBons below to convert the CROSS WALK to the operating position. No tools are
required.

1. Raise the Upright (10) to the vertical position. Slide the Lock Knob

Washer (78) onto the Lock Knob (77) and tighten the Lock Knob
into the Upright

2. Remove the paper backing from the Wrench Clip (65). Press the

Wrench Clip onto the Right Roller Bracket (62) in the indicated

location. Press the Allen Wrench (66) into the Wrench Clip.

Make sure that all parts are tightened securely before you use the

treadmill. The use of the remaining parts will be described in other
sections of this manual. Note: To protect the floor, a covering
should be placed under the treadmill.