Continued), To operate on fan only, Do this – Carrier 52F User Manual
Page 7: To use the, Auto cool feature, Heating feature (on some models), You will see, Air conditioner features, Ouhom o
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Air Conditioner Features
(continued)
TO OPERATE ON FAN ONLY:
YOU WILL SEE:
HUI
MNSPEID
'
hi
cool
mocool
'№Hom
72
COOLS j
DO THIS:
PRESS
MODE BUTTON
CHOOSE
FAN ONLY
HUI
MN SPEED
'
hi
coot
. mo cool
OuHom
o
MODE
72
COOLS j
Ф
OM/OFE
Note: Use this function only when cooling is not desired, such as for room air circulation.
You can choose any fan speed you prefer.
During this function, the display will show the actual current temperature, not the set temperature as in the cooling mode.
TO USE THE
AUTO COOL FEATURE:
YOU WILL SEE:
,
HUT
ЕДИ SPEED
/
hi
COOL
/mocool
FAHOHiy
DO THIS:
PRESS
MODE BUTTON
ЕДИ SPEED 'wfMl
Qmocool
,
Ш0Н1Г
72
COOLS j
Ф
OM/OFE
Note: In this mode, the fan will continue to run for 3 minutes after the compressor shuts off. The fan then cycles on for 2
minutes at 10 minute intervals until the room temperature is above the set temperature, at which time the unit turns back on.
HEATING FEATURE (on some models):
YOU WILL SEE:
Note: This feature can be used with any combination of FAN Speeds. When in the "Heat" Mode, the fan will run continuously
while heat is needed. The temperature will automatically be maintained anywhere between 55F (13°C) and 80F (27°C). When
the room set temperature is satisfied, the fan will cycle off for 10 minutes, and then on for 1 minutes to circulate and sample the
room air.