Sony HT-DDW675 - Manual (Page 18)

6: Setting up the sub 7: Adjusting the speaker
woofer levels and balance
Listening to the sub woofer
POW ER indicator
POWER
Before playing the program souree, set the
volume to minimum on the reeeiver.
1
2
3
4
Turn on the receiver.
Press input buttons (e.g., DVD) to
select the program source (e.g., DVD
player).
Press POWER on the sub woofer.
The POWER indieator on the sub woofer
lights up.
Play the program source.
Adjusting the level
Slight adjustments to the system ean enhanee
your sound enjoyment.
LEVEL
Turn LEVEL to adjust the volume.
Set the volume level to best suit your preferenee
aeeording to the program souree.
Note
Do not set the volume of the sub woofer to maximum.
Extraneous noise may be heard.
— TEST TONE
Adjust the speaker levels and balanee while
listening to the test tone from your listening
position. Use the remote for the operation.
Tip
The reeeiver employs a test tone with a frequeney
eentered at 800 Hz.
1
Press 1/1 to turn on the receiver.
2
Press TEST TONE.
“T. TONE” appears in the display and the
test tone is output from eaeh speaker in
sequenee.
Front (left) —► Center —► Front (right) —►
Surround (right) —t Surround (left) —t Sub
woofer
Adjust the speaker levels and balance
using the LEVEL menu so that the level
of the test tone sounds the same from
each speaker.
For details on the LEVEL menu settings,
see page 26.
Tips
• To adjust the level of all speakers at the same
time, press MASTER VOL +/- on the remote or
t^ MASTER VOLUME -/+ on the reeeiver.
• The adjusted value are shown in the display
d^ng adjustment.
4
Press TEST TONE again after
adjustment.
The test tone turns off.
3
Note
Although these adjustments can also be made via the
front panel using the LEVEL menu (when the test tone
is output, the reeeiver switehes to the LEVEL menu
automatieally), we reeommend you follow the
proeedure deseribed above and adjust the speaker
levels from your listening position using the remote.