Performing initial setup operations, Connecting the ac power cord – Sony HT-DDW675 User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

4: Connecting the AC

power cord

Connect the AC power cord to a wall outlet.

Performing initial setup

operations

Before using the receiver for the first time,

initialize the receiver by performing the

following procedure.

This procedure can also be used to return

settings you have made to their factory defaults.

Use the buttons on the receiver for the operation.

Press 1/1 to turn off the receiver.

Hold down 1/1 for 5 seconds.

“PUSH” and “ENTER” appears in the

display alternatingly.

Press ENTER.

“CLEARING” appears in the display for a

while, then “CLEARED” appears.

The following are reset to their factory

settings.

• All settings in the SET UP, LEVEL,

TONE and CUSTOMIZE menus.

• The sound field memorized for each

input and preset station.

• All sound field parameters.

• All preset stations.

• All index names for inputs and preset

stations.

• MASTERVOLUME-/+issetto

“VOL MIN”.

continued m