Compaq 307502-001 - Manual (Page 9)

1–2 Getting Started
Setting Up the Notebook
Inserting a Battery Pack
If your notebook shipped without an optional battery pack,
proceed to the next section, “Opening the Notebook.”
If your notebook shipped with a battery pack:
1. Turn the notebook underside up on a flat surface.
2. Lower the battery pack into the battery bay at a slight
angle 1, then press downward until the battery pack is
seated 2.
3. Slide the 2 battery pack locking latches to the locked
position 3.
Installing a battery pack
Ä
CAUTION: To ensure that the correct drivers load and to prevent
file corruption or damage to components during initial setup, do not
remove the battery pack until the notebook has been connected to
external AC power.
307502-001.book Page 2 Friday, August 30, 2002 10:30 AM