Cisco 1-PORT G.SHDSL 2600 - Manual (Page 14)

1-Port G.SHDSL WAN Interface Card for Cisco 2600 Series Routers
Command Reference
14
Cisco IOS Release 12.2(4)XL
line vty 0 4
login
!
no scheduler allocate
end
Command Reference
This section documents the changed Cisco IOS commands for configuring the ADSL WAN Interface
Card feature. All other commands used to configure the ADSL WAN Interface Card feature are
documented in the Cisco IOS Release 12.2 command reference publications.
Reference information is provided in this section for configuring the following Cisco IOS commands on
the Cisco 2600 series routers:
Modified Commands
• dsl equipment-type
• dsl linerate
• dsl operating-mode (G.SHDSL)