How to use the pictlre-in-pictlre (pip) feature, Pip) – Philips MX3690B User Manual

Page 38

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

□i

How

TO U

the

ictlre

-I

-P

ictlre

(PIP)

eature

icture-in-Picture ( P I P ) is the

showing of two pictures on the

TV screen at the same time. (One

main screen picture and one small
inset picture - or PIP). For your
ease and convenience this TV has
two separate inputs (ANTenna A
and ANTenna B ) f o r your home’s

Antenna and!or Cable TV system

signal.

The ANT A input is primarily for
the TV’s main screen picture. The

ANT B input is provided as a

second, dedicated source option

for the TV’s PIP “window” and its
feature operations. The signal

connected to the ANT B input can
be either a Split Signal Input (as
described in the section on this

page), or another type of external

signal source (such as a satellite
dish system, additional home
antenna, video accessory, etc.).

See the following steps on how
channels connected to the

ANT(enna) B Input can be shown

and used within the PIP window:

t BEGIN J

Connect your Antenna or

Cable TV signal to the single 75
ohm INPUT plug on a two-way
Signal Splitter (not supplied).

Connect two lengths of RF
Coaxial Cable (F-type coimectors
on both ends) to the two OUTPUT
plugs on the two-way Signal
Splitter.

Connect the twin OUTPUT

plugs on the Signal Splitter to the

ANT A and ANT B Inputs on the
rear of the TV.

continue to next page

S>!AUl Hi l l’

For other possible PIP

S connections see page 43 for

the "More PIP Connections"
section.

If you need any accessories or
parts to complete the described

PIP coimections, contact your
dealer, or our Parts Information

Center at (1-800-292-6066), for
details.

- MAIN SCREEN -

Display signal supplied
primarily through
ANT A Input on rear

of TV.

- PIP WINDOW -

Display signal supplied
primarily through ANT
B Input on rear of TV.

BACK OF TV

Combínatíon VHFAJHF Antenna

4NT(enna) B

Input

OPTIONAL TWO-

WAY SIGNAL

(single 75ohm Input to twin 75 ohm Outputs -
optional RF Coaxial connecting cables also
required)

Note: The purpose of the ANT B input is to
provide an easily connected, dedicated picture
source for PIP feature use. Other signal source
options (such as a satellite dish system, additional
external antenna, VCR, or Video Game) could also
be connected and displayed on the TV’s PIP screen
window through the use of the ANT B input.

Cable TV

Company

See the Set*Up Guide also provided with
your TV set for further Cable TV connection
options and accessories.