Canon SELPHY ES3 CDP-E063-010 - Manual (Page 76)

76 Printing from a Mobile Phone (Wireless Printing)
Infrared (IrDA) Wireless Printing
Print images transmitted from a mobile phone supporting infrared data communication (IrDA).
SELPHY printer supports IrSimple (higher speed infrared data communication).
z The mobile phone must have the following features.
• Infrared data communication (infrared data communication port supporting IrDA)
• A built-in camera capable of recording and saving JPEG images.
1
Check that no memory cards are inserted in the printer, no
Bluetooth unit is attached, and the camera is not connected via
USB cable.
2
Press until the power lamp lights green to turn the power on.
3
Transmit an image from your mobile phone to the printer.
• Printing starts after data
transmission is completed and
the power lamp blinks green.
3 • Printing is done according to the setting value specified in [Print Settings]. Setting of each item
must be done in advance (p. 54).
• If an error occurs, a message will display on the printer's or mobile phone's screen.
• Printing cannot be canceled by pressing
during infrared printing.
• If the transfer is not working well, reposition the mobile phone closer and directly in front of the
infrared data receiver and reinitiate the transfer.
• Note that the distance over which infrared signals can be transmitted and received varies
according to the mobile phone model. For details on connection, refer to your mobile phone's
user guide.
Within 20 cm (7.9 in.) (Do not
place objects within this
range.)
Effective range
Approx. 10 degrees (right
to left)
Approx. 20 degrees (top to
bottom)
CO
PY