Canon SELPHY ES3 CDP-E063-010 - Manual (Page 27)

27 Getting Started
Placing/Connecting the Printer
Set up and connect your SELPHY printer in the following manner for safe use.
1
Place the printer on a flat surface.
2
Connect the supplied power cord to the printer.
3
Insert the plug into a power outlet.
• Do not place the equipment on an unstable or tilted surface.
There is risk that the equipment may fall and cause injury.
• Be sure to select a safe place to avoid tripping over the power cord.
• Do not block the air vents on the back of the printer.
To power outlet
15 cm
(6 in.)
10 cm
(4 in.)
15 cm
(6 in.)
Leave more than 15 cm
(6 in.) of clearance at the
front and back of the
equipment and 10 cm (4
in.) of clearance on both
sides.
CO
PY