Table conventions, Network – Cisco 6400 User Manual
Page 2

A-2
Cisco 6400 Equipment Module Configuration Guide
OL-1812-01
Appendix A Attribute Reference
Table Conventions
Table Conventions
The following codes describe attribute behaviour. They appear on a separate line in the attribute column
for each attribute.
Note
Some attributes contain restrictions or dependencies that are out of the scope of the above table
conventions. In this case, the restriction or dependency will be included with the attribute description
in the table or in a footnote.
Network
Object Name: C4ntNetwork
OAF: C4ntNetwork.oaf
Service Elements
Cross-connection
Profile
NRP Internal PVC
Profile
Cisco 6400 Equipment Module Attribute Reference Tables (continued)
Element Type
Element Name
Table
Table A-2
Attribute Reference Table Conventions
Code
Description
M
Attribute is Mandatory.
R | W | C
R—Attribute is read-only.
W—Attribute is writable.
C—Attribute is writable upon creation, and read-only thereafter.
A | RDP
A—Attribute is autogenerated.
RDP—Reverse Data Path. Attribute value is retrieved from the
element or network management system after you create the
corresponding object.
P
Attribute can be profiled.