Cisco 6400 - Manual (Page 13)

A-13
Cisco 6400 Equipment Module Configuration Guide
OL-1812-01
Appendix A Attribute Reference
Logical Port
Domain [domain]
This is the domain name.
W
Text (16)
Protocol [srprotocol]
Specify the protocol.
M
Text (10) "ATM"
Signalling Role [srsignallingrole]
A DCE logical port represents the "network side" equipment. This logical
port type supports all types of PVCs. A DTE is almost identical to the DCE
logical port except for SVC applications. It assumes the role of the "user
side" of the UNI signalling interface.
W
Enum (3) "DTE"
"DCE"
NNI Enable [srnnienabled]
You can enable or disable NNI for the logical port.
W
Bool (5)
Admin Status [sradminstatus]
Specify the administrative status for the logical port.
W
Enum (12)
"Locked"
"Unlocked"
"ShuttingDown"
Maximum Connections [srconnections]
Specify the maximum number of connections for the logical port. For
internal ports it is 2048.
W
Numb (10)
Range=0-214748
3647 0
Class [srclass]
The CPC class for this logical port object.
R | A
Text (4) "C4lp"
Resource Map [srrmmap]
This attribute is an integer used to carry a bit map of services supported by
this Network.
W
Numb (10)
Range=0-214774
83647 48
QOS [srqos]
Specify the Quality of Service.
W
Text (32)
Group [srgroup]
Specifies the logical group membership. Allows several logical ports to be
put in a common group as a pooled resource.
W
Text (32)
Table A-7 Logical Port (continued)
Attributes Acceptable
Values Default Values