Philips AZ241517 - Manual (Page 9)

DIGITAL TUNER
PROGRAMMING RADIO STATIONS
You can store up to 29 radio stations in the memory. When tuning
to the preset station, the preset number (1 to 29) is indicated in
the display.
/. Tune to a station, following the three steps given under
TUNING TO RADIO STATIONS.
-* If the frequency is already stored in the memory, the preset
number will be displayed.
2. Press PROGRAM to programme your desired station.
— PROGRAtii will Start flashing on the display.
3. Press the PRESET control (up or down) to allocate a preset
station number from 1 to 29.
4. Press PROGRAM again to confirm the setting.
5. Repeat the above four steps to store other frequencies and
presets in the memory.
- You can clear a preset number by storing another frequency in
its place.
Tuning to preset stations
There are three ways possible in which you can tune to preset
stations:
• Press the PRESET ◄, ► control (down, up) on the set.
• By remote control, press T, A (down, up) until the desired
preset number appears on the display.
• By remote control, to directly key in the preset station: press
TUNER and then ket in the number of your preset station using
the digits 0-9.
S>
s
UJ
'
; ® c : ® ‘
I ^ r
v ' . ( ■ = ’ ’ ’
3 i
1
1
> 3 )
^ > 1 . J ' '
_ _ _ _ ^ f
D 3 — " !
I /
t '
1
1 1
■aLIPJ 1 ;
i
\
!