Philips AZ241517 - Manual (Page 10)

CD PLAYER
CD DISPLAY INDICATION
Cfi
- OPEN/CLOSE: When you open / close the CD tray.
- Total track number and playing time: In stop position.
- no diSC: Error in CD operation or with the CD (see
'TROUBLESHOOTING').
- Current track number and elapsed playing time: During
CD play.
- In PAUSE position, the display freezes and the elapsed
playing time flashes.
- SHUFFLE/REPEAT (ALL): When the respective mode is
activated.
- select ; When you activate PROGRAM prior to track selection
- PROGRAM: When programme function is active.
- Pr and the number (1-20): indicating the position of a track
within a programme.
- P: (and a track number) indicates that a particular track has
been programmed in STOP position
- FULL; Maximum track number stored.
- clear : When you cancel a CD programme
- Playing time and total number of programmed tracks: in
stop position or at the end of a CD programme.
PLAYING A CD
1. Select CD mode using the CD-TAPE-TUNER button.
2. Press OPEN »CLOSE A ■ on the set or on the remote control
press CD and then TRAY OPEN to open the CD tray.
3. Insert the CD, printed side facing up and press
0PEN»CL0SE A ■ to close the CD tray.
4. Start playback by pressing PLAY» PAUSE HI.
5. To interrupt playback, press PLAY»PAUSE HI. Press
PLAY»PAUSE HI again to continue playback.
6. Press STOP ■ to stop CD playback.
7. To switch off the set press the POWER button.
Note: CD playback will also stop when:
- the CD tray is opened;
- the CD has reached the end;
- you press the POWER button;
- you change the sound source to TAPE or TUNER.
10