Philips FWC150 - Manual (Page 22)

TIMER SLEEP TIMER
5 Press CLOCK'TIMER again to
Store the setting.
The clock starts.
• Jo exit without storing the setting,
press Honthesyst^.
Notes:
~ During dock setting if no button is
pressed within 90 seconds, the system
will exit dock setting mode
automatically.
- When a power /nterruption occurs, the
dock setting is erased.
Timer Setting
• The system can switch on to CD or
TUNER mode automatically at a
preset time. It can serve as an alarm
to wake you up.
• Before setting the timer; make sure
the clock is set correctly.
• The timer will always be switched on
once it is set
• The volume of the tinner will
increase from the minimum
level to the nnost recently
selected volume level.
Press and hold CLOCK'TIMER
for more than two seconds to
select timer mode.
— 'TU. . ys" or "C3. - X;; ■■x ■
starts flashing "X X ■■ XX" is " IB=Ou
AM" or'tiQ ’OO” or the last timer
setting depending on whether 12-
6r 24-hour mode has been
selected.
— The TIMER starts flashing.
2 Press CD or TUNER to select the
desired source.
■* "Til X I! ■ X X " indicates the Tuner
mode is selected.
-• "Cl_____X X: X X■ indicated the CD
mode is selected.
• Before selecting CD, make sure a disc
is loaded in the CD changer tray.
3 Press -44 or ►► on the system to set
the hour for the timer to start
4 Press H or w on die system to set
the minute for the timer to start
5 Press CLOCK'TIMER to store
the start time.
The timer is now set
— The TIMER remains on the display.
• At the preset time, the timer will be
activated.
— The selected source will be
played.
Notes
- During timer setting if no button is
pressed within 90 seconds, the system
will exit timer setting mode
outomoticolly.
- Ifthe source selected is TUNER, the
last tuned frequency will be switched
If the source selected is CD, playbock
win begin with the first track of the
selected disc or progtam. If the CD
trays ate empty, the TUNER will be
selected instead.
The timer win not activate if a recording
is in progress.
To switch off the TIMER
1 Press and hold CLOCK'TIMER
for more than two seconds.
2 Press ■ on the system to cancel the
timer
— The timer is now switched off.
— The display will show "Orr" and
the TIMER disappears.
To start the TIMER again (for the
same preset time and source)
1 Press and hold CLOCK‘TIMER
for mrare than two seconds.
2 Press CLOCK'TIMER again to
store the start time.
“• The timer is now on.
— The TIMER appears on the display.
Sleep Timer (only on remote
control)
This feature allows you to select a
length of time after which the system
will switch to the standby mode
automatically
Press SLEEP on the remote control
repeatedly to select a period of time.
-* The selections are as follows (time
in minutes); 15 9D HS 50
-orr - IS ...
-■SLEEP xx"or"0rF"willbe
displayed. ’X X" is the tinne in
minutes.
When you reach the desired length
of time, stop pressing the SLEEP
button.
— The SLEEP display lights up.
— The Sleep Timer is now set Before
the system switches to standby
mode, a countdrown of 10
seconds will be displayed.
"SLEEP 10"-"SLEEP 3"...-
■5LEEP I"-SLEEP"
While SLEEP mode is activated
• Press SLEEP once to view the
remaining length of time.
• Press SLEEP twice to change the
pre-selected period of time.
— The display will show the
remaining time followed by the
sequence of sleep timer options.
To switch off the Sleep Timer
• Press SLEEP repeatedly until ’uFF“
is displayed, or press the
STANDBY-ON button.
t1t<3 UR 7nR41 rFNfXI