Philips FWC150 - Manual (Page 20)

RECORDING
m T R P E
AMM TWC1>* VBCD MMIV
IT AMX L—^
Notes
- For recording, use only tape oflEC type
I (nomio( tape).
- The tape is secured at both errds with
leader tape. At the beffnning and end
of tape, nothing will be recorded for six
to seven seconds
- The recording level is set automatically,
regarcOess of the postion ofVolume,
DBBorDSC.
- To prevent accidental recording break
out the tab on the left shoulder of the
tape side you wont to protect
One Touch Recording
• For One Touch Recording, as soon as
you press RECORD,the current
source (CD,TUNER or AUX) will be
recorded on tape deck 1.
1 Load a blank tape in tape deck 1.
2 Press RECORD on tape deck 1 to
start recordirig.
— The REC starts flashing.
3 Press PAUSE to interrupt
recording
4 Press STOP*OPEN on tape deck 1
to stop recording
CD Synchro Start
Recording
During CD synchro start recording
• Do not fest forward/rewind your
tape in tape deck Z
1 Load a blank tape into tape deck 1
and a disc into the disc tray.
2 Press CD.
• You can program the tracks in the
order you want them to be recorded
(see ProgrammingTracks). If you do
not the tracks are recorded
according to the order on the
selected disc.
3 Press RECORD on tape deck 1 to
start recording
The REC starts flashing
4 Press STOP*OPEN on tape deck 1
to stop recording then press ■ to
stop disc playback.