Zapco i-Force - Manual (Page 28)

28
i-600 Specifications
Output Power Rating Power
Mono Output 4 ohm @ 14.4V (3.0%) 1 x 430W
Mono Output 2 ohm @ 14.4V (3.0%) 1 x 610W
THD Distortion with 22k Filter < 1.5%
Frequency Response (-3dB) 10 - 230Hz
S/N Ratio (A-Weighted) > 85dB
Input Gain Control
Low Level Input 150mV — 4V
High Level Input 450mV — 12V
Input Impedance 20kΩ
Features
Battery Voltage Range for Operating
10.5V — 16V
LED Indicator Red/Green
Protection (Short, Thermal, Overcurrent) Yes
Crossover Lowpass
Crossover Slope 24dB/Octave
Bass EQ at FULL/LP at 45Hz 12dB
Dimensions mm / in.
Length
343mm / 13.5 in.
Width 273mm / 10.75 in.
Height 57mm / 2.25 in.