System requirements – Canon DVPC RECORDER 1 User Manual
Page 7
7
System Requirements
OS
Microsoft Windows XP Home Edition or Professional
(installation of Service Pack 1 recommended)
Proper operation is not guaranteed on Windows XP that has been
upgraded from a previous version.
CPU
Pentium III 800 MHz or more (Pentium 4 or later recommended)
RAM
128 MB or more (256 MB or more recommended)
Free Hard Disk Space
For installation
Free Hard Disk Space: 30 MB or more
For video recording
Free Hard Disk Space: 1 GB or more (1 minute of video recording
uses 0.22 GB)
File System: NTFS
Recordings cannot be made on FAT32 or FAT16 formatted hard
disks.
Display
800
× 600 pixels (1024 × 768 pixels or more recommended)/High
Color (16 bit) or better
Interface
IEEE1394 (OHCI compliant)
❍ Proper operation is not guaranteed on a dual CPU PC or on a user-built PC.
❍ Proper operation is not guaranteed on any particular system, even if it meets the requirements
outlined above.
❍ Recordings cannot be saved on a hard disk recognized as [Removable disk].
❍ This software will not operate properly if repeater or other IEEE1394 devices are connected to
the computer’s IEEE1394 (DV) terminal.
❍ This software will not operate properly if more than one camcorder is connected to the
computer.
❍ Proper operation is not guaranteed for recording on compressed drives.
❍ This software can also be used with recordings in 24p mode (NTSC only). Use an editing
software that supports the 24p mode.