Winco PSS65LS-*/B - Manual (Page 2)

Page i
TABLE OF CONTENTS
INTRODUCTION i
GUIDE TO PRODUCT SAFETY 1
BASIC INFORMATION 2
Description 2
Specification Table 3
PREPARING THE UNIT 3
Unpacking the unit 3
ENGINE GENERATOR INSTALLATION 4
Installation 4
Fuel Line Installation 4
Fuel Pressure Tables 5
Lubrication 6
Coolant 6
Battery Installation 6
BATTERY TNDER & BLOCK HEATER WIRING 6
TRANSFER SWITCH INSTALLATION 7
AC Electrical Connections 7
DC Electrical Connections 9
INITIAL START-UP 9
EXERCISER CLOCK 10
TROUBLESHOOTING INFORMATION 11
LP/NG ADJUSTMENT 12
FUEL TYPE CONVERSION 12
WIRING DIAGRAMS 14
12 MONTH WARRANTY 20
PROPER USE AND INSTALLATION
You must be sure your new engine generator set is:
*
Properly serviced before starting
* Operated in a well ventilated area
* Properly exhausted and gases safely dispersed
* Wired by a qualified electrician
* Operated only for its designed purposes
* Used only by operators who understand its operation
* Properly maintained
Read and understand all instructions in the
manual before starting and operating the gen-
erator set.
USING THIS MANUAL
Congratulations on your choice of a Winco generator
set. You have selected a high-quality, precision-engineered
generator set designed and tested to give you years of sat-
isfactory portable service.
To get the best performance from your new engine gen-
erator set, it is important that you carefully read and follow
the operating instructions in this manual.
Should you experience a problem please follow the
“Things To Check” near the end of this manual. The war-
ranty listed in this manual describes what you can expect
from WINCO should you need service assistance in the fu-
ture
COPY YOUR MODEL AND SERIAL NUMBER
HERE
No other WINCO generator has the same serial number as
yours. It is important that you record the number and other
vital information here. If you should ever need to contact us
on this unit it will help us to respond to your needs faster.
MODEL_____________________________________
SERIAL NUMBER____________________________
PURCHASE DATE____________________________
DEALER____________________________________