Winco WL18000VE/N - Manual (Page 13)

13 3110-00 60706-39
TROUBLESHOOTING
PROBLEM (SYMPTOMS) POSSIBLE
CAUSES
———————————————————————
Won’t Start *Low Oil Level.
*Fouled spark plug.
*Out of fuel.
*Start switch in Off position.
*Fuel valve turn off.
*Plugged fuel filter.
———————————————————————
Voltage too low *Engine speed is too low.
*Generator overloaded.
*Defective stator.
*Defective rotor (field).
*Defective Capacitor.
———————————————————————
Circuit Breaker *Defective load.
Trips *Defective receptacle.
*Excessive Load.
———————————————————————
Voltage too high *Engine speed is too high.
———————————————————————
Generator *Overloaded.
overheating *Insufficient ventilation.
———————————————————————
No output voltage *Short in load (disconnect).
*Tripped or defective circuit
breaker.
*Broken or loose wire.
*Defective receptacle.
*No residual magnetism
(in generator).
*Defective stator.
*Defective rotor (field).
*Shorted capacitor.
*Shorted diodes on rotor.
*GFCI Receptacle tripped.
———————————————————————
GENERATOR SPECIFICATIONS
Generator manufacturer MECC Alte Spa
Generator model number S0F-30A
Part number 1648-00
Rotor resistance 8.04 Ohms
Stator resistance 0.056 Ohms
Cap winding resistance 0.41Ohms
Capacitors (2) 35 mF
(1) 31.5 mF
Capacitor part number 30033-1
30033-11
ENGINE SPECIFICATIONS
Engine manufacturer Briggs & Stratton
Engine model number 543477
Type & Code 000-G1
Spark plugs 491055
Air filter 692519
Air filter pre-cleaner 692520
Oil filter 842921
Spark plug gap 0.030 in
Armature air gap 0.005 - 0.008 in
Intake valve clearance 0.004 - 0.006 in
Exhaust valve clearance 0.004 - 0.006 in
Oil capacity .4 to .5 Quarts