Wilson Audio Cub Series 2 User Manual

Page 37

4-1

Note: Before setting up the Cub System II study carefully the previous section on room

acoustics. It provides valuable information on determing the ideal room location for your
speakers.

REPARATION

You will need the following items:

•

Supplied hardware kit

•

Tape measure

•

Known listening position

ETUP

ROCEDURE

Stand the unit up (inside the crate) and gently walk/slide the CUB out of the

crate. Remove the plastic outer bag by tilting the CUB over and opening the

bag at the base of the CUB. Stand the CUB up and remove the bag.

Note: Do not cut the bag off of the CUBs. You may mark the cabinet or damage a
driving element. Additionally, you will need this bag, if you need to repackage the
CUBs. Save your shipping crates and all packing materials, they are speciﬁcally de-
signed to prevent harm from coming to your CUBs.

Move the CUBs into the desired location.

Note: Be careful not to touch the driving elements when you are moving your
CUBs!

U B

Y S T E M

I I S

E T U P