Viconics VCM7000 Installation Guide - Manual (Page 2)

VCM7000 Series-Installation Guide 2 |
D
escription
All current “Network Ready” Viconics VT(X)7000 ( 5000 Series ) controllers purchased
after July 2010 are capable of being retrofit in the field with accessory communication
adapters that enables the controllers to be integrated into virtually all leading building
automation system.
This approach allows the flexibility to add network communication strategies as bud-
gets allow or as the buildings needs change.
The manufacturing date is identified inside the controller on a small label which also
contains the part number. The format of the date code is year / week. If in doubt,
please contact the factory for assistance. Always verify the manufacturing date code
of all thermostats before ordering any communication modules.
Ex.: VTR7355A5500, date code is 1115 manufactured in
2011 during the 15th week of the year at the beginning of
April.
If required, Network Ready ( Stand-Alone ) Terminal Equipment Controllers can be
field retrofitted with the following communication adapters
Models Available
MODEL DESCRIPTION
VCM7000V5000W Wireless Retrofit Communication Card for all VT7000 & VTR7000 Series
VCM7000V50xxP Wireless Retrofit Communication Card for all VT7000 & VTR7000 Series
VCM7300V5000B BACnet Retrofit Communication Card for all VT7200 & VT7300 Series
VCM7600V5000B BACnet Retrofit Communication Card for all VT7600 Series
VCM7607V5000B BACnet Retrofit Communication Card for all VT76x7 with RH
VCM7300T5000B BACnet Retrofit Communication Card for all VTR7300 Series
VCM7300V5000E Echelon Retrofit Communication Card for all VT7200 & VT7300 Series
VCM7600V5000E Echelon Retrofit Communication Card for all VT7600 Series
VCM7607V5000E Echelon Retrofit Communication Card for all VT76x7 with RH
Network Ready Controller Wireless Network Controller
Wireless Communication Card