VICI D-4-I - Manual (Page 12)

8
Specifications
Mains (line): 115/230 V~50/60 Hz, 175 VA
Fuse:
2 A, time-delay, 5 x 20 mm
Pressure:
6.9 kPa (1 psi) operating, 6.9 MPa (1000 psi) max.
working
Maximum temperature 400°C
Heater power:
60 W max., 48 V, PWM
Sensitivity
10X range: 1.0 V/nA
1X range: 0.1 V/nA ± 1%*
Range
10X: 10 nA full-scale
1X: 100 nA full-scale*
Noise
1X: 20 fA/√Hz (referred to the input), 0.1 - 10 Hz*
10X: 5 fA/√Hz (referred to the input), 0.1 - 10 Hz
Risetime:
10 msec, 10% = 90%*
Output impedance: < 1 Ω,
attenuated
1 KΩ, unattenuated, 1 V, 10 V
Environmental ratings: 10°C - 50°C, 10% - 95% relataive humidity
*Controller only, PDHID mode, 10 V unattenuated output
Introduction