VACUUBRAND RC 6 - Manual (Page 21)

page 21 of 59
The pump RC 6 doesn’t contain any nonferrous heavy metal.
Components Wetted materials
Metal parts
aluminum alloy, stainless steel, grey cast iron, steel
(partly plasma nitrated), nickel-plated, zinc-plated
Plastic materials
epoxy resin, FFKM, FPM, NBR, PBT, PEEK, PFA,
PPS glass-fiber reinforced, PTFE, PVC
Wetted parts
We reserve the right for technical modification without prior notice!
Abbreviations
FFKM: Perfluoro elastomer
FPM: Fluoroelastomer
NBR: Nitrile butadiene rubber
PBT: Polybutylene terephthalate
PEEK: Polyether ether ketone
PFA: Perfluoroalkoxy
PPS: Polyphenylene sulfide
PTFE: Polytetrafluoroethylene
PVC: Polyvinyl chloride
Gas inlet temperatures
Operating condition Inlet pressure
Permitted range of gas
temperatures at inlet
Continuous operation
> 75 Torr (100 mbar)
(high gas load)
➨
50 °F to 104 °F
(+10°C to +40°C)
Continuous operation
< 75 Torr (100 mbar)
(low gas load)
➨
32 °F to 140 °F
(0°C to +60°C)
Short-time
(< 5 minutes)
< 75 Torr (100 mbar)
(low gas load)
➨
14 °F to 176 °F
(-10°C to +80°C)