Accessories / spare parts, Stead (thread g1/2”, see “accessories / spare, Parts”, pg. 45) – VACUUBRAND MV 10C NT VARIO o.C. User Manual
Page 45: See “accessories / spare
page 45 of 97
Accessories / Spare parts
Controller VNC 2 VARIO E ..........................................................................683080
External pressure transducer VSK 3000, ..................................................636657
capacitive, ceramic diaphragm sensor 1080-0.1 mbar
Coolant valve VKW-B, VACUU•BUS ..........................................................674220
Venting valve VBM-B / KF 16, VACUU•BUS............................................... 674217
Adapter small flange KF DN 16 to hose nozzle 1/2
”
.................................
636004
VACUU•BUS Y-type adapter ......................................................................636656
VACUU•BUS extension cable, 6.6ft (2m) ....................................................612552
VACUU•BUS extension cable, 32.8ft (10m) ..............................................2618493
VACUU•BUS wall jack .................................................................................636153
Serial cable RS 232C, 9-pin, Sub-D .............................................................637837
Installation set CVC 3000 (clips and screws) ..............................................636593
Exhaust waste vapor condenser
with catchpot 0.52 qt (500 ml) ......................699948
(Upgrade kit including holder and front cover)
Separator (inlet) ...........................................699979
small flange KF DN 25
(adapter to hose nozzle DN 15 mm at inlet included)
Controller CVC 3000 ...................................683160
100-230 V 50-60 Hz (table top unit)
Controller CVC 3000 ...................................636595
100-230 V 50-60 Hz (built-in version)